Publications

Research Books Authors and Edited

[1] S. K. Dwivedi, S. Jain, and K. K. Gupta, Modeling and Control of Power Electronics Converter Systems for Power Quality Improvements. London, UK: Academic Press (Elsevier), 2018.

[2] M. F. Rahman and S. K. Dwivedi, Eds., Modeling, Simulation and Control of Electrical Drives. London, UK: Institution of Engineering and Technology (IET), 2019.

[3] S. Singh, S. Gairola, and S. Dwivedi, Eds., Electric Vehicle Components and Charging Technologies: Design, Modeling, Simulation and Control. London, UK: Institution of Engineering and Technology (IET), 2024.

[4] K. Kumar, A. Devanshu, and S. K. Dwivedi, Electric Vehicle Propulsion Drives and Charging Systems. Boca Raton, FL, USA: CRC Press, 2024.

[5] S. K. Dwivedi et al., Eds., Flexible Electronics for Electric Vehicles. Singapore: Springer Nature, 2023.

[6] V. Khare, M. Bhatia, and S. Dwivedi, Cognitive Science, Computational Intelligence, and Data Analytics: Methods and Applications with Python. London, UK: Academic Press (Elsevier), 2024.

[7] V. Khare, M. Bhatia, S. Dwivedi, and K. K. Pant, Hydrogen Technologies in Decarbonizing Industries and Energy Systems. Hoboken, NJ, USA: Wiley-IEEE Press, 2026..

Research Publications

A.     List of published international journal and national journals

1.  Ge Xie, Kaiyuan Lu, Sanjeet Kumar Dwivedi, Jesper Riber Rosholm, Weimin Wu, “Permanent Magnet Flux Online Estimation Based on Zero Voltage Vector Injection Method,” IEEE Transactions on Power Electronics, vol. 30, no. 12, pp. 6866–6877, Dec. 2015. (International journal, Q1)

2.  Ge Xie, Kaiyuan Lu, Sanjeet Kumar Dwivedi, Jesper Riber Rosholm, Frede Blaabjerg, “Minimum Voltage Vector Injection Method for Sensorless Control of PMSM for Low Speed Operations,” IEEE Transactions on Power Electronics, vol. 31, no. 2, pp. 1674–1685, Feb. 2016. (International journal, Q1)

3.  N. Agarwal, A. Brem, Sanjeet Dwivedi, “Frugal and Reverse Innovation for Harnessing the Business Potential of Emerging Markets, The Case of a Danish MNC,” International Journal of Innovation Management, vol. 24, no. 1, art. 2050009, 2020. (International journal, Q1)

4.  Harshit Mohan, M. K. Pathak, S. K. Dwivedi, “Sensorless Control of Electric Drives, A Technological Review,” IETE Technical Review, vol. 37, no. 5, pp. 504–528, 2020. (International journal, Q1)

5.  Harshit Mohan, M. K. Pathak, S. K. Dwivedi, “A Novel Flux State Based Control Method for Improved Dynamic Performance of Induction Motor,” IETE Journal of Research, pp. 1–13, 2021. (International journal, Q1)

6.  Bhoopendra Singh, Shailendra Jain, Sanjeet Dwivedi, “Torque Ripple Reduction Technique with Improved Flux Response for a Direct Torque Control Induction Motor Drive,” IET Power Electronics, vol. 6, no. 2, pp. 326–340, 2013. (International journal, Q1)

7.  Bhoopendra Singh, Shailendra Jain, Sanjeet Dwivedi, “Enhancement in Steady State and Dynamic Performance of DTC IM Drive,” Journal of Electrical Engineering, vol. 64, no. 5, 2013. (International journal)

8.  B. Singh, S. Jain, Sanjeet Dwivedi, “Experimental Investigations on the Influence of Flux Control Loop in a Direct Torque Control Drive,” International Journal of Power Electronics and Drive Systems, vol. 2, no. 4, pp. 391–400, 2012. (International journal)

9.  Bhoopendra Singh, Shailendra Jain, Sanjeet Dwivedi, “Direct Torque Control Induction Motor Drive with Improved Flux Response,” Advances in Power Electronics, vol. 2012, 2012. (International journal)

10.  B. Singh, M. Agrawal, S. Dwivedi, “Analysis, Design, and Implementation of a Single Phase Power Factor Corrected AC DC Zeta Converter with High Frequency Isolation,” Journal of Electrical Engineering and Technology, vol. 3, no. 2, pp. 243–253, 2008. (International journal)

11.  Bhim Singh, B. P. Singh, Sanjeet Dwivedi, “DSP Based Implementation of Vector Control Scheme for Permanent Magnet Synchronous Motor Drive,” IETE Journal of Research, vol. 53, no. 2, pp. 65–72, 2007. (International journal)

12.  Bhim Singh, Sanjeet Dwivedi, “DSP Based Implementation of Hybrid Fuzzy PI Speed Controller for Direct Torque Controlled PMSM Drive,” International Journal of Emerging Electric Power Systems, vol. 8, no. 2, 2007. (International journal)

13.  B. Singh, B. P. Singh, S. Dwivedi, “AC DC Cuk Converter for Power Quality Improvement of Vector Controlled PMSM Drive,” IETE Journal of Research, vol. 53, no. 1, pp. 37–45, 2007. (International journal)

14.  B. Singh, Sanjeet Dwivedi, M. Agrawal, “Analysis and Design of Single Phase PF Corrected AC DC SEPIC Converter with High Frequency Isolation,” Journal of the Institution of Engineers (India), Electrical Division, vol. 87, pp. 3–11, Mar. 2007. (National journal)

15.  B. Singh, B. P. Singh, S. Dwivedi, “A State of Art on Different Configurations of Permanent Magnet Brushless Machines,” Journal of the Institution of Engineers (India), Electrical Engineering Division, vol. 87, pp. 1–10, Jun. 2006. (National journal)

16.  Bhim Singh, B. P. Singh, Sanjeet Dwivedi, “AC DC Zeta Converter for Power Quality Improvement in Direct Torque Controlled PMSM Drive,” Korean Journal of Power Electronics, vol. 6, no. 2, pp. 146–162, Apr. 2006. (International journal)

17.  Bhim Singh, B. P. Singh, Sanjeet Dwivedi, “Active Waveshaping of AC Mains Current in Direct Torque Controlled Permanent Magnet Synchronous Motor Drive,” International Journal of Energy Technology and Policy, vol. 4, no. 1–2, pp. 82–97, 2006. (International journal)

18.  Bhim Singh, Sanjeet Dwivedi, “Direct Torque Control of Permanent Magnet Synchronous Motor Drive,” IEEMA Journal, pp. 44–47, Apr. 2005. (National journal)

C: List of published research papers in international conferences

19.  K. V. R. Chowdary, Kundan Kumar, Subrata Banerjee, Sanjeet Dwivedi, “In Motion Charging Coil Configuration for the Improved Battery Charging of Electric Vehicles,” Proc. 2025 IEEE North East India International Energy Conversion Conference and Exhibition (NE IECCE), 2025. (International conference)

20.  Kundan Kumar, W. Dhanraj, Sanjeet Kumar Dwivedi, Vima Mali, Subrata Banerjee, “Modelling and Simulation Analysis of Innovative Offshore Wind Energy Plant,” Proc. 2024 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Surathkal, India, Dec. 2024. (International conference)

21.  Vikram Kumar Saxena, Kundan Kumar, Vima Mali, Sanjeet Kumar Dwivedi, “Closed Loop Control of GaN HEMT Based Buck Converter Using Modified RGDC,” Proc. 2024 IEEE 3rd Industrial Electronics Society Annual Online Conference (ONCON), 2024. (International conference)

22.  Kundan Kumar, K. V. V. S. R. Chowdary, Vima Mali, Sanjeet Dwivedi, “Analysis of Enhanced Power Control Strategy for On the Move Battery Charging of Electric Vehicles,” Proc. IECON 2024, 50th Annual Conference of the IEEE Industrial Electronics Society, 2024. (International conference)

23.  Vima Mali, Brijesh Tripathi, Kundan Kumar, Sanjeet Dwivedi, Ranjan Behera, “Exploring Various Topology Using DC DC Converter in Hybrid Energy Storage System for Electric Vehicles,” Proc. IECON 2022, 48th Annual Conference of the IEEE Industrial Electronics Society, 2022. (International conference)

24.  Kundan Kumar, M. Sanasam, Vima Mali, Sanjeet Dwivedi, Ranjan Behera, “Analysis of Current in CCM DCM Modes for Hybridization of Multiple Energy Sources for Electric Vehicles Charging,” Proc. 2022 IEEE Global Conference on Computing, Power and Communication Technologies 2022.

25.  R. Maheshwari, D. Patil, S. Dwivedi, “Port Controlled Hamilton Model and Control of Induction Machine with Inverter Output LC Filter,” Proc. 1st International Conference on Power Electronics and Energy (ICPEE), Bhubaneswar, India, 2021. (International conference)

26.  R. Maheshwari, D. Patil, S. Dwivedi, T. Ebel, “Lyapunov Function Based Stability Analysis of Symmetric Induction Machine,” Proc. IECON 2021, 47th Annual Conference of the IEEE Industrial Electronics Society, 2021. (International conference)

27.  Aditya Pangam, Harshit Mohan, Mukesh Pathak, S. Jeevanand, Sanjeet Dwivedi, “A New Indirect Power Control of Induction Motor Drives,” Proc. 2020 International Conference on Power Electronics and IoT Applications in Renewable Energy and its Control (PARC), 2020. (International conference)

28.  Harshit Mohan, M. K. Pathak, S. K. Dwivedi, “Reactive Power Based Speed Control of Induction Motor Drive Using Fuzzy Logic for Industrial Applications,” Proc. 2020 IEEE International Conference on Power Electronics, Smart Grid and Renewable Energy (PESGRE 2020), 2020. (International conference)

29.  Subhashree Sarangi, Subhendu Bikash Santra, Sanjeet Kumar Dwivedi, Debashis Chatterjee, “Performance Improvement of PV Array by Minimizing Circulating Current Through Modified Bypass Arrangement in Partial Shaded Condition,” Proc. PESGRE 2020, 2020. (International conference)

30.  Sanjeet Kumar Dwivedi, Jorg Dannehl, “Modeling and Simulation of Stator and Rotor Faults of Induction Motor and Their Experimental Comparison,” Proc. 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), 2017. (International conference)

31.  S. K. Rai, Pradyumn Chaturvedi, S. L. Shimi, Sanjeet Dwivedi, “A Novel Six Level Inverter for Single Phase Stand Alone Photovoltaic System,” Proc. 2016 18th European Conference on Power Electronics and Applications, EPE’16 ECCE Europe, 2016. (International conference)

32.  P. S. Kumar, Frede Blaabjerg, Patrick Wheeler, Kyo Beum Lee, Mahajan Sagar Bhaskar, Sanjeet Dwivedi, “Five Phase Five Level Open Winding Star Winding Inverter Drive for Low Voltage High Current Applications,” Proc. IEEE Transportation Electrification Conference and Expo, Asia Pacific, Busan, 2016. (International conference)

33.  P. S. Kumar, Frede Blaabjerg, Patrick Wheeler, Raghav Khanna, Mahajan Sagar Bhaskar, Sanjeet Dwivedi, “Optimized Carrier Based Five Level Generated Modified Dual Three Phase Open Winding Inverter for Medium Power Application,” Proc. IEEE ITEC Asia Pacific, Busan, 2016. (International conference)

34.  Ge Xie, Kaiyuan Lu, Sanjeet Kumar Dwivedi, Jesper Riber Rosholm, “Improved INFORM Method by Minimizing the Inverter Nonlinear Voltage Error Effects,” Proc. 2015 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), 2015. (International conference)

35.  Ge Xie, Kaiyuan Lu, Dwivedi Sanjeet Kumar, Jesper Riber Rosholm, “High Bandwidth Zero Voltage Injection Method for Sensorless Control of PMSM,” Proc. 2014 17th International Conference on Electrical Machines and Systems (ICEMS), 2014. (International conference)

36.  Sanjeet Dwivedi, Bhim Singh, “Vector Control vs Direct Torque Control Comparative Evaluation for PMSM Drive,” Proc. 2010 Joint International Conference on Power Electronics, Drives and Energy Systems and 2010 Power India, 2010. (International conference)

37.  Sanjeet Kumar Dwivedi, Michael Laursen, Steffan Hansen, “Voltage Vector Based Control for PMSM in Industry Applications,” Proc. 2010 IEEE International Symposium on Industrial Electronics (ISIE), 2010. (International conference)

38.  B. Singh, B. P. Singh, Sanjeet Dwivedi, “DSP Based Implementation of Sliding Mode Speed Controller for Vector Controlled PMSM Drive,” Proc. India International Conference on Power Electronics (IICPE), 2006. (International conference)

39.  B. Singh, B. P. Singh, Sanjeet Dwivedi, “DSP Based Implementation of Sliding Mode Speed Controller for Direct Torque Controlled PMSM Drive,” Proc. 2006 IEEE International Conference on Industrial Technology (ICIT), 2006. (International conference)

40.  B. Singh, B. P. Singh, Sanjeet Dwivedi, “Performance Comparison of High Frequency Isolated AC DC Converters for Power Quality Improvement at Input AC Mains,” Proc. IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), 2006. (International conference)

41.  B. Singh, B. P. Singh, Sanjeet Dwivedi, “DSP Based Implementation of Hybrid Speed Controller for Vector Controlled PMSM Drive,” Proc. 2006 IEEE International Symposium on Industrial Electronics (ISIE), 2006. (International conference)

42.  B. Singh, B. P. Singh, Sanjeet Dwivedi, “DSP Based Implementation of Fuzzy Pre-Compensated PI Speed Controller for Vector Controlled PMSM Drive,” Proc. 2006 IEEE Conference on Industrial Electronics and Applications (ICIEA), 2006. (International conference)

43.  B. Singh, S. Dwivedi, “Improved Power Quality AC DC Flyback Converter for Variable Speed Permanent Magnet Synchronous Motor Drive,” Proc. 2006 IEEE Power India Conference, 2006. (International conference)

44.  Bhim Singh, B. P. Singh, Sanjeet Kumar Dwivedi, “Improved Power Quality Converter Fed Direct Torque Controlled Permanent Magnet Synchronous Motor Drive,” Proc. IEEE Petroleum and Chemical Industry Conference (PCIC), New Delhi, Nov. 2004, pp. 261–266. (International conference)

45.  Bhim Singh, B. P. Singh, Sanjeet Kumar Dwivedi, “AC DC Boost Bridge Converter for Power Quality Improvement of Vector Controlled PMSM Drive,” Proc. National Power Electronics Conference (NPEC), IIT Kharagpur, Dec. 2005, pp. 245–254. (National conference)

46.  Bhim Singh, B. P. Singh, Sanjeet Kumar Dwivedi, “AC DC Push Pull PFC Converter for Power Quality Improvement of Vector Controlled PMSM Drive,” Proc. International Conference on Computer Application in Electrical Engineering Recent Advances (CERA), IIT Roorkee, Sept. 2005, pp. 257–265. (National conference)

47.  Bhim Singh, B. P. Singh, Sanjeet Kumar Dwivedi, “Power Quality Improvements in Direct Torque Controlled Permanent Magnet Synchronous Motor Drive,” Proc. National Conference on Energy Computer and Communication (NC ECC), Delhi, 2006, pp. 1–8. (National conference)

48.  Bhim Singh, B. P. Singh, Sanjeet Kumar Dwivedi, “DSP Based Implementation of Sensorless Direct Torque Controlled PMSM Drive,” Proc. National Power Systems Conference (NPSC), Roorkee, Dec. 2006, pp. 1–6. (National conference)

Patents

A. Verified List of granted international patents,

1. S. K. Dwivedi, et al, “Motor drive and method for monitoring operational measurement data of an electric motor with at least one operating point,” DE 102019112019 B4, granted, 2024.

2. S. K. Dwivedi et al, “Method and apparatus for characterisation of a three-phase induction motor,” US 10944348 B2, granted, 2021.

3. S. K. Dwivedi et al, “Automatic identification of the type of motor,” EP 3167545 B1, granted, 2021.

4. S. K. Dwivedi et al, “Motor driver and method for monitoring measurement data of an electric motor having an operating point,” CN 111913105 B, granted, 2023.

5. S. K. Dwivedi et al, “Method and device for characterizing a three-phase asynchronous motor,” DE 112016006552 T5, granted, 2020.

6. S. K. Dwivedi et al, “Method and device for characterizing a three-phase induction machine,” CN 108781051 B, granted, 2022.

7. S. K. Dwivedi et al, “Automatic identification of the type of motor,” US 10359472 B2, granted, 2019.

8. S. K. Dwivedi et al, “Motor identification,” CN 106575939 B, granted, 2020.

9. S. K. Dwivedi et al, “Method for determining a motor type of an electric motor and motor control device,” DE 102022107869 B3, granted, 2024.

B. Verified list of filed (pending) International patents

10. S. K. Dwivedi, “Method and detection system for the state of the rotor of an electric motor,” WO 2012136211 A2, filed, 2012.

11. S. K. Dwivedi et al, “Method and apparatus for characterisation of a three-phase induction motor,” WO 2017152938 A1, filed, 2017.

12.   S. K. Dwivedi et al, “Motor drive and method for monitoring operational measurement data of an electric motor having at least one operating point,” US 20200355526 A1, filed, 2020.

13.  S. K. Dwivedi, “Hydrogen production and distribution system,” WO 2024109998 A1, filed, 2024.

14.  S. K. Dwivedi et al, “Method for evaluating the degradation level of capacitors of a power filter, adjustable speed drive and power converter provided for performing the method,” US 20230194630 A1, filed, 2023.

15.  S. K. Dwivedi et al, “Method for estimating capacitor degradation and apparatus for performing the same,” CN 116298585 A, filed, 2024.

C. Verified list of filed (pending) patents in India

16.   S. K. Dwivedi et al, “A system and method for enhancing the efficiency of an offshore wind and electrolyser system,” IN 202431059736, filed, 2024.